CARE AND MAINTENANCE OF STONE FOR MARBLE AND GRANITE PT 1

Your natural stone is an investment that you undoubtedly treasure and want to protect correctly and with proper care and maintenance. For this, a variety of liquids have been created for marble stone care and granite stone maintenance.

Granite Countertop Care

Although granite is a hard and highly durable material, it is also porous. The pores in a granite slab will absorb liquids and other substances that have a fine consistency.

If the substance or liquid has pigment (color), it can get into the pores of your beautiful granite countertop or vanity and cause discoloration that you would like to remove.

If that happens, it will be necessary to "pull out" the color of the stone. Keeping up with the maintenance of your granite surface can make it easier to remove these stains.

As with anything of substantial value, the effort you put into maintaining it will directly impact performance and longevity.

Regular maintenance should be carried out on all the furniture in your home, especially on granite or marble surfaces, since they are the pieces of furniture that your guests notice the most.

Stone cleaning products should not contain anything that will break down the sealer that should already be on your stone and the polish should contain a small amount of sealer, so using it once or twice a month replenishes any sealer that his stone has lost.

Marble Countertop Care

Like granite, marble is a valuable natural stone that needs regular maintenance and care. It also has pores that will absorb substances and stain.

You can make your marble more resistant to stains by taking care of it regularly with a maintenance routine that requires minimal effort.

The importance of having adequate equipment to cut dekton and porcelain

Dekton, among other alternative stone materials, continues to grow in popularity for applications such as countertops, flooring, and both interior and exterior wall cladding. Being a hard dense product, it is crucial to use appropriate tooling during the fabrication process. Carlos Sustaita, production director for STA Granite, provides several important tips of advice for those working with compact sintered stone.

Why do products such as Dekton need special/different tools than those that are used for cutting granite and marble?

Material hardness is the key to understanding why you need different tools to fabricate Dekton. The material has a

very high density (ultra-compact), which means that if you don’t use proper tools, you can either break the tool or the material or even worse, damage the machinery.

The cutting process requires trimming the edges to release tensions. Then you have to follow cutting recommendations, which include using plenty of water, the proper speed, feed rate, etc. Once you follow the rules, it’s a piece of cake.

When doing edging on Dekton, What is the difference in the process compared to a natural stone?

In this sense, Dekton’s edge is very easy to work with since the material is very homogeneous, and it is easy to get very good results. Any fabricator can do it well on the first attempt.

What are some common mistakes that fabricators are making when it comes to cutting this material? And, what are some common mistakes with doing edging or doing sinkholes or something?

The main mistake is trying to fabricate Dekton as if it was a granite or quartz composite. You will fail if you use the same tools, speed rates, and so on. Another common mistake is trying to cut Dekton in uneven support. It is a common source of problems too.

Sometimes people ask about what machine is best to cut Dekton. I believe the key is not the machine but the tools and proper maintenance. I have seen people with very modest equipment doing amazing things and the other way around.

7 Keys for Cutting Ultra-Compact and Sintered Dekton and Porcelain Materials

1. Water

It may seem too simple or too intuitive to matter, but less than adequate water AND hoses positioned incorrectly is the most common error causing headaches among cutting these materials.

2. Check your table level

One of the more overlooked aspects of successful cutting is, to the degree that your table is not level in the horizontal plane, vibrations will occur. This unevenness can result in chipping and likely breaking the edge of your slab.

3. Buy the right blade

As cliche, as it may sound, choosing the right blade for the material you are processing, is critical.

4. Removing tensioning strips

While each manufacturer of ultra-compact and sintered porcelain materials may, or may not have tensioning strips built into the perimeters of each slab, if they are not removed before cutting, the slab is at higher risk of cracking or breaking.

5. Feed rate and RPMs

Using the same feed rate and RPMs you may be accustomed to when cutting other materials can be a recipe for trouble. Unlike fabricating more common materials such as marble and granite, we’ve seen the most success cutting ultra-compact and sintered porcelain materials when following a systemized approach is used.

6. Avoiding Plunging

While plunge cutting tends to be of little concern for most sawyers when cutting ultra-compact and sintered porcelain materials it can pose big problems resulting in cracking or breaking your slab.

7. Cutting Sinks

Projects requiring a sink cut-out can be an obstacle many fabricators dread. Since we already know plunging is not the ideal way to go about this, what are your options? When preparing a sink cut-out, it is advised to drill each of the four corners with a 1/2” core bit before to start initiating cutting.